Home > FASTENERS > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - PACKAGED
Choose a sub category:
SCREWS - PKG - DRYWALL -COARSE SCREWS - PKG - DRYWALL - FINE SCREWS - PKG- DECK - COATED
SCREWS - PKG - DECK - SS SCREWS - PKG- COMPOSITE -COAT SCREWS - PKG- COMPOSITE - SS
SCREWS -PKG- TRIM/FINISH -COAT SCREWS - PKG- TRIM/FINISH - SS SCREWS - PKG- MULTI USE -COAT
SCREWS - PKG- MULTI USE -YLW/Z SCREWS - PKG - STRUCTURE -COAT SCREWS - PKG - LANDSCAPE TIMBE
SCREWS - PKG- MTL BLDG -HEX DR SCREWS - PKG- MTL BLDG -HEX PI SCREWS - PKG- MTL BLDG -FH DRI
SCREWS - PKG- CEMENT BOARD SCREWS - COLLATED - DRYWALL SCREWS - COLLATED - FLOOR -YLW
SCREWS - COLLATED - DECK -COAT SCREWS - COLLATED - DECK -SS SCREWS - COLLATED- CEMENT BOAR
Sort By:
1
SCREW DECK PHLPS BGL NO8 X 3IN SCREW DECK PHLPS NO7 X 2-1/2IN SCREW DECK PHLPS BGL NO6 X 2IN
Midwest Fastener Deck Screw, Thread Size: 8 in, 3 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK Midwest Fastener Deck Screw, Thread Size: 7 in, 2-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK Midwest Fastener Deck Screw, Thread Size: 6 in, 2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK
SCREW DECK PHLPS NO6 X 1-5/8IN SCREW DECK PHLPS NO6 X 1-1/4IN SCREW DECK PHLPS BGL NO10X4IN
Midwest Fastener Deck Screw, Thread Size: 6 in, 1-5/8 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK Midwest Fastener Deck Screw, Thread Size: #6, 1-1/4 in L, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK Midwest Fastener Deck Screw, Thread Size: 10-8, 4 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 51 PK, Drive Size: #2, Applicable Materials: Wood
SCREW DECK PHLPS BGL NO8 X 3IN SCREW DECK PHLPS NO8 X 2-1/2IN SCREW DECK PHLPS BGL NO6 X 2IN
Midwest Fastener Deck Screw, Thread Size: #8-8, 3 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 82 PK, Drive Size: #2, Applicable Materials: Wood Midwest Fastener Deck Screw, Thread Size: #8-8, 2-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 99 PK, Drive Size: #2, Applicable Materials: Wood Midwest Fastener Deck Screw, Thread Size: #6-8, 2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 168 PK, Drive Size: #2, Applicable Materials: Wood
SCREW DECK PHLPS NO6 X 1-5/8IN SCREW DECK PHLPS NO6 X 1-1/4IN SCREW DECK PHLPS BGL NO6 X 1IN
Midwest Fastener Deck Screw, Thread Size: #6-8, 1-5/8 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 205 PK, Drive Size: #2, Applicable Materials: Wood Midwest Fastener Deck Screw, Thread Size: #6-8, 1-1/4 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 248 PK, Drive Size: #2, Applicable Materials: Wood Midwest Fastener Deck Screw, Thread Size: #6-8, 1 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Point Type: Sharp, Steel, Dacrotized, Package Quantity: 314 PK, Drive Size: #2, Applicable Materials: Wood
SCREW DECK PHLPS NO10X3-1/2IN SCREW DECKING FRMG NO8X1-1/4IN SCREW DCK STR DRV TAN NO10X4IN
Midwest Fastener Deck Screw, Thread Size: 10-8, 3-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 53 PK, Drive Size: #3, Applicable Materials: Wood GRK Fasteners Framing and Decking Screw, Thread Size: #8, Thread Type: Coarse, Thread Length: 0.826 in, 1-1/4 in L, Head Type: Countersunk, Drive Type: Star, Drive Size: T15, Point Type: Self-Tapping, Steel, Yellow, Polymer Camo Screw, 4 in L, Head Type: Bugle, Drive Type: Star, Point Type: Type 17, Drive Size: T25, Tan, Includes: CAMO Power Bit
SCREW RT COMPOSITE 8X2-1/2IN SCREW R4 FRAME/DECK 9X2IN SCREW R4 FRAME/DECK 9X2-1/2IN
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber. For interior and exterior use. GRK Fasteners Framing Screw, Thread Size: #9, 2 in L, Head Type: Bugle, Drive Type: Star, Package Quantity: 110 PK, Multi-Purpose, Yellow, Applicable Materials: Cement, Plastic, Wood R4 Multi-purpose framing and decking screws provide a faster drive for improved productivity.
SCREW R4 FRAME/DECK 9X3-1/8IN SCREW R4 FRAME/DECK 10X3-1/8IN SCREW R4 FRAME/DECK 10X2-1/2IN
GRK Fasteners Framing Screw, Thread Size: #9, 3-1/8 in L, Drive Type: Star, Steel, Package Quantity: 80 PK, Multi-Purpose, Yellow, Applicable Materials: Cement, Plastic, Wood GRK Fasteners R4 Framing and Decking Screw, Thread Size: #10, 3-1/8 in L, Head Type: Bugle, Drive Type: Star, Steel, Climatek-Coated, Package Quantity: 70 PK, Drive Size: T-25, Yellow, Applicable Materials: Cement, Fiber, Melamine, Plastic, Sheet Metal, Wood, Includes: Driver Bit GRK's R4 Self-countersinking screw has a patented underhead with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting a perfectly clean hole into even the most brittle materials without cracking any surface treatment. This design enhances the R4s versatility by allowing the fastener to countersink into even the hardest woods. The head of the screw closes the hole off with precision, leaving no damaged fibers around the head. R4 screws 3-1/8 and longer have a four threaded CEE thread. This enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque.
SCREW R4 FRAME/DECK 10X4IN SCR STRL T-25 RECESSED STAR SCREW R4 STAR 100CT 9X2-3/4IN
GRK Fasteners R4 Screw, Thread Size: #10, 4 in L, Thread Type: W-Cut, Head Type: Countersunk, Flat, Drive Type: Star, Steel, Climatek, Package Quantity: 50 PK, Multi-Purpose, Thread Length: 2.99 in, Drive Size: T25, Yellow, Applicable Materials: Cement Fiber Board, Particle Board, Plastic, Sheet Metal, Wood GRK's R4? self-countersinking screw has a patented underhead with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting a perfectly clean hole into even the most brittle materials without cracking any surface treatment. This design enhances the R4's versatility by allowing the fastener to countersink into even the hardest woods. The head of the screw closes the hole off with precision leaving no damaged fibers around the head. R4? screws 2 in and longer have a four threaded CEE thread. This enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque.
SCREW DECK PHLPS BGL NO8 X 3IN SCREW LOW PROFILE NO8X1-1/4IN SCREW LOW PROFILE NO8X1-1/2IN
Midwest Fastener Deck Screw, Thread Size: #8, 3 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 272 PK, Drive Size: #3 White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet??? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet??? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet??? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head. White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet??? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet??? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet??? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head.
XT II GTXT312PP Wood Screw SCREW FIN/TRIM HEAD 8X2IN SCREW DCKNG 305SS NO10X2-1/2IN
Grabber's XGT??? Professional exterior-grade GrabberGard??-coated fasteners are ideal for pressure-treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. XGT??? unique engineering reduces wood splitting and provides excellent holding power. XGT??? QuickGrab??? point means super-fast starts. GRK Fasteners PHEINOX Screw, 2 in Length, W-Cut Thread, Recessed Star Drive, Zip-Tip Point, Steel, 305 Stainless Steel, Package Quantity: 100 PK, T10 Drive, Applicable Materials: Cedar, Redwood, Specialty Hardwood, Includes: T-10 Bit PHEINOX??? 305 stainless steel screws are corrosion and stain-resistant, designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe.
SCREW R4 FRAMING 12/14X5-5/8IN SCREW DECK PHLPS NO8 X 2-1/2IN SCREW DCKNG 305SS NO10X3-1/8IN
GRK Fasteners R4 Screw, Multi-Purpose, Thread Size: #12, Thread Type: W-Cut, Thread Length: 3 in, 5-5/8 in L, Head Type: Countersunk, Drive Type: Star, Drive Size: T25, Steel, Applicable Materials: Cement Fiberboard, Particleboard, Plastic, Sheet Metal, Wood Midwest Fastener Deck Screw, Thread Size: #8, 2-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 491 PK, Drive Size: #2, Applicable Materials: Wood PHEINOX??? 305 stainless steel screws are corrosion and stain-resistant, designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe.
SCREW DCKNG 316SS NO10X2-1/2IN SCREW LOW PROFILE NO8X2-1/2IN SCREW LOW PROFILE NO8 X 2IN
PHEINOX 316 stainless steel screws are corrosion and stain-resistant, designed to withstand coastal environments. Typical applications for 316 stainless are in harsh salt water environments such as coastal, industrial and agricultural areas. White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet??? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet??? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet??? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head. White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet??? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet??? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet??? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head.
SCREW DECK STAR NO9 X 3IN SCREW DECK STAR NO9 X 1-5/8IN SCREW DECK STAR NO9 X 2-1/2IN
Deck Elite screws are designed for use in deck boards and provide a quick drive and clean finish. For use in deck boards, fencing, and deck rails. Deck Elite screws have a corrosion resistant coating to resist rust and keep decks looking like new. GRK Fasteners DECK ELITE Deck Screw, Thread Size: #9, 1-5/8 in L, Thread Type: Coarse, W-Cut, Head Type: Bugle, Drive Type: Star, Point Type: Fast Bite, Self-Drilling, Steel, Polymer, Tan, Applicable Materials: Wood Deck Elite screws are designed for use in deck boards and provide a quick drive and clean finish. Deck Elite screws have a corrosion-resistant coating to resist rust and keep decks looking like new.
SCREW DCKNG 316SS NO10X3-1/8IN SCREW DECK STAR NO8 X 2IN SCREW LOW PROFILE NO8X3-1/8IN
PHEINOX 316 stainless steel screws are corrosion and stain-resistant, designed to withstand coastal environments. Typical applications for 316 stainless are in harsh salt water environments such as coastal, industrial and agricultural areas. GRK Fasteners ELITE Deck Screw, Thread Size: #8, 2 in L, Thread Type: Coarse, W-Cut, Head Type: Bugle, Drive Type: Star, Point Type: Self-Drilling, Steel, Polymer, Package Quantity: 700 PK, Tan, Applicable Materials: Wood White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet??? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet??? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet??? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head.
SCREW TRIM HEAD NO8 X 3-1/8IN SCREW TRIM HEAD NO8 X 1-1/2IN SCR STRL T-30 RECESSED STAR
FIN/Trim??? screws are an excellent choice for deck rails, exterior/interior trim, joining cabinets and most fine carpentry applications such as crown moulding and window/door jambs. It leaves a clean look as the tiny heads disappear when countersunk. Approved for use in all applications that include pressure treated lumber. FIN/Trim??? screws are an excellent choice for deck rails, exterior/interior trim, joining cabinets and most fine carpentry applications such as crown moulding and window/door jambs. It leaves a clean look as the tiny heads disappear when countersunk. Approved for use in all applications that include pressure treated lumber. GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates.
SCREW DCK STR DRV TAN NO10X4IN SCREW TRIM HEAD FNSHNG NO8X2IN SCREW FRM/DECK R4 990PK 9X2IN
Camo Screw, 4 in L, Head Type: Bugle, Drive Type: Star, Point Type: Type 17, Drive Size: T25, Tan, Includes: CAMO Power Bit FIN/Trim??? screws are an excellent choice for deck rails, exterior/interior trim, joining cabinets and most fine carpentry applications such as crown moulding and window/door jambs. It leaves a clean look as the tiny heads disappear when countersunk. Approved for use in all applications that include pressure treated lumber. GRK Fasteners R4 Screw, Multi-Purpose, Thread Size: #9, Thread Type: W-Cut, Thread Length: 1.299 in, 2 in L, Head Type: Bugle, Drive Type: Star, Drive Size: T25, Point Type: Self-Tapping, Steel, Yellow, Climatek, Applicable Materials: Cement Fiberboard, Particleboard, Plastic, Sheet Metal, Wood
SCRW FRM/DK R4 900PK 9X2-1/2IN SCRW FRM/DK R4 720PK 9X3-1/8IN SCREW DECK STAR NO9 X 2-1/2IN
GRK's R4? self-countersinking screw has a patented under head with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting an ideally clean hole into even the most brittle materials without cracking any surface treatment. This design enhances the R4?'s versatility by allowing the fastener to countersink into even the hardest woods. The head of the screw closes the hole off with precision, leaving no damaged fibers around the head. R4? screws 3-1/8 in and longer have a four-threaded CEE thread. This enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque. GRK's R4? self-countersinking screw has a patented under head with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting an ideally clean hole into even the most brittle materials without cracking any surface treatment. This design enhances the R4?'s versatility by allowing the fastener to countersink into even the hardest woods. The head of the screw closes the hole off with precision, leaving no damaged fibers around the head. R4? screws 3-1/8 in and longer have a four-threaded CEE thread. This enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque. Deck Elite screws are designed for use in deck boards and provide a quick drive and clean finish. For use in deck boards, fencing, and deck rails. Deck Elite screws have a corrosion resistant coating to resist rust and keep decks looking like new.
SCREW DECK STAR NO9 X 3IN SCREW DECK STAR NO8 X 2IN SCREW DCKNG 305SS NO10X2-1/2IN
GRK Fasteners Deck Screw, Thread Size: #9, 3 in L, Thread Type: Coarse, Head Type: Countersunk, Drive Type: Star, Steel, Polymer, Tan, Applicable Materials: Wood GRK Fasteners ELITE Deck Screw, Thread Size: #8, 2 in L, Thread Type: Coarse, W-Cut, Head Type: Bugle, Drive Type: Star, Point Type: Self-Drilling, Steel, Polymer, Package Quantity: 1400 PK, Tan, Applicable Materials: Wood PHEINOX??? 305 stainless steel screws are corrosion and stain-resistant, designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe.
SCREW FRM/DECK R4 450PK 10X4IN SCRW FM/DK R4 630PK 10X3-1/8IN SCREW DCKNG 305SS NO10X3-1/8IN
GRK Fasteners R4 Screw, Multi-Purpose, Thread Size: #10, Thread Type: W-Cut, Thread Length: 2.992 in, 4 in L, Head Type: Bugle, Drive Type: Star, Drive Size: T25, Point Type: Self-Tapping, Steel, Yellow, Climatek, Applicable Materials: Cement Fiberboard, Particleboard, Plastic, Sheet Metal, Wood GRK's R4? self-countersinking screw has a patented under head with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting an ideally clean hole into even the most brittle materials without cracking any surface treatment. This design enhances the R4?'s versatility by allowing the fastener to countersink into even the hardest woods. The head of the screw closes the hole off with precision, leaving no damaged fibers around the head. R4? screws 3-1/8 in and longer have a four-threaded CEE thread. This enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque. PHEINOX??? 305 stainless steel screws are corrosion and stain-resistant, designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe.
SCREW TRM HD 305SS NO8X2-1/2IN SCREW TRIM HEAD 305SS NO8X2IN SCREW RUG STRUCTURAL 3/8X16IN
PHEINOX??? 305 stainless steel screws are corrosion and stain-resistant, designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe. PHEINOX??? 305 stainless steel screws are corrosion and stain-resistant, designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe.
   
 
1